| |
___________________________________________________________________
| Tuff Metal TM Wear
Resistant Putty -
|
|
|
 |
- Recommended for reclamation
& rebuilding of equipments subjected to wear, due to erosion,
cavitation & abrasion.
- Provides smooth finish
- Diamond hard trowellable putty
- Gives excellent wear and abrasion
resistant properties.
- Unique property of wear resistance
on rotating parts
- Used for rebuilding of pump
casings, impellers, MPO, MDV bodies, valves, chutes, pipes &
reducers, condenser tube plates & wear plates.
|
|
______________________________________________________________TOP
| Tuff Metal TM Brushable
Ceramic
|
|
|
 |
- Recommended for protection against
turbulence, abrasion, cavitations, bimetallic corrosion.
- Ultra smooth, high gloss , ceramic
filled brushable polymer
- Improves pump efficiency
- Could be applied as top coat
over wearing compound, pneu wear & wear resistant putty.
- Used for coating of condenser
tube sheet & water box, rotating cup screens, repairing
of glass lined reactors, pump casings, ID Fans
|
|
________________________________________________________________TOP
| Tuff Metal TM Wearing
Compound- |
|
|  |
- Recommended for wear and abrasion
resistance against hard sliding abrasion
- Filled with large ceramic
beads and fine silicon carbide which protects the equipments.
- Used for rebuilding of bird
centrifuge, venturies, dedusting fans, bends, chutes, cyclones,
nozzels and material handling equipments.
|
|
_______________________________________________________________TOP
|
Tuff Metal TM High Temperature
Wearing compound
|
|
| |
- Recommended
against heavy abrasion in high temperature areas
- Withstands continuous
temperature up to 250
OC.
- Used
for rebuilding of scrubbers, cyclones, dust collectors, fan
housings.
|
|
______________________________________________________________TOP
| Tuff Metal TM Pneu
Wear
|
|
| |
- Recommended for wear and abrasion
resistance against heavy pneumatic abrasion.
- Filled with small ceramic beads
and fine silicon carbide which protects the equipments.
- Used for rebuilding of
bends, chutes, cyclones, dust filters and pumps
|
|
______________________________________________________________TOP
| Tuff Metal TM High
Temperature
Pneu Wear
|
|
|
|
- Recommended
against fine particle abrasion in high temperature areas
- Withstands continuous
temperature up to 250
OC.
- Used
for ID fans, elbows ,dust
collectors, fan housings
etc.
|
|
______________________________________________________________TOP
|
Tuff Metal TM Flex 80 Putty
|
|
|  |
- Recommended for rebuilding of
rubber components for impact and erosion resistance
- Trowelable urethane compound.
- Used for repairing of conveyor
belts, rubber liners, rubber rollers, vibratory feeder bowls.
|
|
______________________________________________________________TOP
| Tuff Metal TM Flex 80 Liquid
|
|
|
|
- Recommended for repairing of
rubber components.
- Pourable version of Flex 80
putty
- Used for pump casings, impellers,
tank lining, trailing cables jointing, rubber moulds
|
|
______________________________________________________________TOP
| Tuff Metal TM Flex
Brushable
|
|
| |
- Recommended for coating equipments
as impact resistant linings.
- Brushable version of flex 80
putty.
- Used for protecting feeder bowls,
chutes , pumps, impellers and other equipments.
- Can be used for insulation of
high tension electrical wires.
|
|
______________________________________________________________TOP
| Tuff Metal TM Urethane Primers |
|
| |
- Rubber primer- Used for enhancing
the adhesion of rubber surface to flex products
- Metal primer- Used for enhancing
the adhesion of metal surface to flex products
|
|
TOP |
